DESCRIPTION

The Chekad 2023 is specifically designed to measure the thickening time of cement slurries in strict compliance with ISO-10426, API Spec 10A and API RP-10B Schedules. With high temperatures and pressures applied to the cement, it is possible to simulate a variety of conditions found in actual down-hole well cementing. The measured thickening time can then be used to formulate actual well cementing plans.

Downloadables

Chekad 2023 Datasheets
Chekad 2023 Operation Manual

More Info Tab

OPERATION

Operation of the pressurized consistometer is simple with all of the operational controls conveniently located on the PC. The readout indictors for the viscosity, pressure, and temperature, as well as operational instructions, are easily read from the 20-inch monitor. The consistometer is designed so that closure, heating, and pressurization can be achieved quickly. This ensures compliance with the requirement of ISO and API schedules. The temperature control system will automatically control the rate of temperature rise of the slurry (i.e. temperature gradient). When the slurry reaches the desired maximum temperature, the system will hold the slurry temperature at that level. The temperature and viscosity of the slurry, and current pressure are displayed constantly on the software numerically and graphically. Contains easy spin-on/off automotive style mineral oil filter to remove sediment and other contaminants from mineral oil.

FEATURES

• 20 inch color monitor for display of testing parameters and access to programmable features
• Easy network LAN connection for remote viewing in real-time
• Maximum operating pressure 15,000 psi (102 MPa)
• Maximum operating temperature 400° F (205° C)
• Precision, magnetic, drive assembly keeps maintenance down to a minimum
• Automatic, shut down cooling
• Lots of on-board memory for thousands of tests
• CementLab software takes consistometer technology into the 21st century
• Pressure control optional
• Redesigned with automated technologies to remove unnecessary valves, switches, and timers

BENEFITS

• Rate of temperature rise of the slurry can be closely controlled over a wide range of temperature gradients including a multi-slope gradient
• Easy network configuration for remote viewing of tests, data transfer.
• High-wattage slurry heater provides high heating rates needed to simulate high temperature gradients in wells as required by ISO and API schedules
• The units have viscosity alarms that can be set over the range from less than 30 Bc to 100 Bc
• The cooling coils around the pressure vessel permits the circulation of a cooling fluid to cool the pressure vessel quickly

Specifications Tab

DRIVE UNIT

Drive Motor: 400 W, 220VAC
Drive Speed: 150 rpm (Variable Speed Optional)

AIR/WATER CONNECTIONS

Water In/Out: 1/4 FNPT (2)
Air Input: 1/4 FNPT (1) max 120psi

ELECTRICAL

Input Voltage: 230 VAC (±10%)
Input Power: 4500W
Current: 20A
Input Frequency: 50-60Hz

MECHANICAL

Height: 80 in. (200 cm)
Width: 27 in. (66 cm)
Depth: 34 in. (84 cm)
Weight: 320 kg

ENVIRONMENTAL

Operating Temp.: 32 to 105°F, 0-40°C
Operating humidity: 0-95% non condensing

HEATER

Heater Power: 4500 W
Heater Type: Internal Cast Rod Heater
Heater Control: SS Relay

Spare Parts Tab

Product-01-01 Image
Product-01-02 Image
Product-01-03 Image
Product-01-04 Image
Product-01-05 Image
Product-01-06 Image
Product-01-07 Image
Product-01-08 Image
Product-01-09 Image
Product-01-10 Image